KRD41 Small Drop Test Machine

Name: KRD41 Small Drop Test Machine
Brand: CME Technology Co., Ltd.

KRD41 series small drop tester is a swing arm type servo lifting drop test machine, which is suitable for free-fall (face, edge, and angle) tests of small consumer electronics and components. It is equipped with a height display and a sensor for height tracking, which can accurately give the product drop height. It can simulate falls in which a specimen, normally in the unpacked state, or simulate repeated falls dropped with packaging to evaluate the impact resistance or the damage caused by the fall of the product during transportation. As one of the drop test equipment suppliers, our KRD41 drop test machine complies with the international standards ISO2248, IEC68-2-27, JISC 0044, IEC 60068-2-32 and ISTA relevant standards.

Catalogue Download Get A Quote Watch The Video

FEATURES OF KRD41 SMALL DROP TEST MACHINE

Control system based on the handheld pad, human-machine interactive control, high accuracy, and good repeatability
High-strength lifting table: the frame structure pallet has high strength and hardness, and can withstand large load tests and accelerated impact drops
Fully automatic PLC control; high-precision tachometer encoder equipped with high-precision collector
Built-in pneumatic release mechanism, the electric valve is used to control the extension and retraction of the cylinder
Packaging product face, edge, angle, etc., with edge and angle fixing fixtures to facilitate testing
Safety protection: it has the function of sound, light, and other fault alarms and automatic shutdown, with travel protection switches and limits switches to prevent accidental operation and protect the safety of the equipment and operators

Products

TECHNICAL SPECIFICATIONS OF KRD41 SMALL DROP TEST MACHINE

Model	KRD	KRD
Parameters	Parameters	41-200
Max. Load (kg)	100	200
Drop Height (mm)	300～1500
Max. Specimen Size (mm)	Depth 840	Depth 840
Position Accuracy	±2% or ±10mm (subject to the larger value)
Drop Zone Size （W*D/mm）	1200×1200	1400×1400
Test Mode	Face, Edge and Angle
Power	1-phase AC 220V±10% 50Hz
Working Environment	Temperature range 0～40℃, Humidity≤80% (non-condensing)
Installation Condition	Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment
Standards	ISO2248-1985(E) IEC68-2-27 ISTA

Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail.

TABLE OF KRD41 SMALL DROP TEST MACHINE

KRD41 drop test machine is mainly composed of an impact plate, servo motor lifting mechanism, turning worktable, guide pillar, fixture, table extension mechanism, release and unlocking mechanism, damping device, etc. The structure picture is shown in the figure below.

The working principle of the vertical drop test system can be briefly described as the lifting cylinder lifting the working table and the specimen to a certain height, and is released by the electromagnetic release mechanism. Since the work surface adopts a compressed energy storage spring during the lifting process, the work surface falls at a speed greater than the falling speed of the specimen. The specimen keeps its original state (surface, edge, and angle) and falls freely, bumps with the bottom plate, and completes the test requirements.